An attractive molding is a any continuous projection that is used to enhance the feel of a wall. In ancient Greece, we were holding first used to throw water out of the wall. The contours, measurements, and projections of moldings vary greatly.

Frieze

One kind of molding – the frieze (or frieze board) – was first suited for the Parthenon with the Acropolis. The frieze is regarded as element of the Greek architectural style.

The Parthenon was designed for the goddess Athena. The frieze moldings which are used were meant to tell the story of her conquer Poseidon to become the patron with the ancient city that’s now Athens.

The frieze panels really are a series of designed pediments which are full of the photographs of Athena’s birth and rise to power. Today, a frieze board will be the flat panel just below a crown molding or cornice. Often, low relief is applied for this panel for additional decoration.

Today, frieze moldings are most common being a area of an attractive molding that follows the neoclassical architecture or decorating style.

You want a pretty high ceiling (a minimum of 9 feet), and it’s really a good idea to stain or paint the frieze and the crown molding the identical color. The frieze is an excellent approach to visually bring the ceiling down and earn the room appear cozier.

Crown Molding

Crown molding is among the most popular kind of cornice molding. Crown molding is generally a single-piece of decorative molding, installed near the top of a wall, within an angle to the adjoining ceiling. However, I have come across crown molding assemblies of 5 or maybe more pieces in elaborate settings.

Crown molding often includes a profile that projects on the ceiling and on the wall, adding a wealthy appearance with a room. It’s used on top of cabinets or built-in furniture.

Introducing this kind of decorative molding into a not at all hard room supplies a historic character the room wouldn’t normally otherwise have. Crown molding is additionally used in combination with other moldings to provide details to fireplace mantels and shelves. (For which it’s worth, this is probably my personal favorite architectural feature).

Crown molding can be a form of Cornice Molding. The definition of "cornice" describes molding installed down the top of a wall or above from the. Once this treatment is produced from multiple bits of molding, stage system a "build-up cornice." The opposite kind of cornice molding is the Cove Molding.

Cove Molding

Cove molding is incredibly comparable to crown molding, with similar application overall performance. The main difference between the two is within the profile. Cove molding carries a concave profile (which bows inward) while crown molding includes a convex (outward) profile.

While crown is most in your house in traditional settings, Cove moldings are equally comfortable in country, or perhaps contemporary settings. That you do not normally see multi-piece assemblies of cove moldings. You are able to occasionally see it "beaded" at top and bottom for the little accent.

Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

Kitchens as well as other more functional parts of the property may be in places you will find the more form of the cove molding. Over time, coves and crowns are getting to be smaller, most still bear the shapes and styles from the original Greek and Roman designers.

Chair Rail Molding

A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in areas where damage might occur from people waking up away from chairs.

That is why, the harder traditional chair rails have a nosing from the center, with curved and beveled surfaces that taper time for the wall above and below the nosing.

Today, chair rails remain a standard detail in traditional interiors. They serve the decorating aftereffect of unifying various architectural information on a place, for example window and door trim, and fireplace surrounds.

Chair rail can also be used like a cap for wainscoting or another wood paneling. This decorative molding adds a feeling of detail and charm while achieving continuity within a room by unifying the various decorative elements.

Panel Molding

Panel molding, commonly termed as a picture frame molding, appears to be a substantial empty frame, and it is often section of designs on walls of old Colonial and, Georgian, and Early American homes. The positioning with this molding must be above the chair rail height resulting in Ten to twelve inches below the ceiling.

How big such a decorative molding, measuring 1" to 3" wide, should be proportionate towards the ceiling height in the room. Like the other moldings, panel molding adds a sense of charm and delicate detail into a room.

Wall framing appears in the Georgian amount of American architecture, when plaster began to replace wood panels about the walls. Panel molding is also a good way to divide walls into large, aesthetically pleasing units, devoid of the same cost of full wall paneling.

Another application of this versatile molding is to trim openings created by wider planks that are assembled as rails and designs. Often, the centers of these frames stay open. By applying panel moldings round the perimeter from the opening, you create the look of a photo frame.

After this decorative molding is painted in the same color as the surrounding walls, you achieve a sculptural quality to some wall, adding texture and shadows. If moldings are painted in contrasting colors, they can produce a striking three dimensional appearance, giving depth and dimension. This type of treatment solutions are popular for staircases and entries.

Baseboard & Base Molding

Baseboard molding protects the foot of the wall from ware and tear, while hiding openings as well as other irregularities in which the wall meets the bottom. Base moldings provide floor line a greater profile, and can be as elaborate or simple as you wish.

Whereas it can be relatively simple to setup chair rail over a level plane, baseboard (like crown) may be tricky in case your floors (or ceilings) aren’t level. For this reason, I suggest getting a professional woodworker to the setting up these moldings.

Together remedy to uneven floors, you are able to install a "shoe molding" down the bottom front edge to obtain the baseboard a finished look. Something more important you’re able to do with baseboard (along with with the toe kick of your kitchen cupboards) is incorporate accent lighting.

This is simply not in keeping with the pure traditionalist, however it is a fairly nifty method to have accent lighting round the perimeter of the room. You could not try this until they came up with small LED rope lights nowadays.

Rope lights appear in different lengths and hues, and is easily installed behind baseboard. Simply make a notch within the back side with the baseboard, at the top, and run the rope lights into the notch.

This really is more often used in commercial spaces, but continues to be included entries and hallways – particularly in contemporary homes.

Flexible Moldings

When you have a curved wall or arch, you can sure enough have a fantastic craftsman develop a curved molding for approximately 3 x the expense of a straight molding. Or, you can get a flexible molding approximately around the same price because the straight one.

These enable you to install moldings onto curved surfaces or arches, minus the delay and expense of getting them made out of wood. The stock profiles (you can find hundreds) are identical for the rigid versions and they are generally compatible as much as paint finish is involved.

For more information about
moulding.vn visit this website.