A fusible link is a short piece of insulated low-voltage cable inside an automotive wiring harness that is developed to protect the harness in applications exactly where a fuse is unsuitable. In an intense current overload situation, the conductor within the link is melted whilst the ensuing flame and spark is contained inside the link’s insulation. What are the ratings for fusible links?Fusible links are not rated in amps like fuses simply because each installation is unique and developed to meet specific circuit protection specifications. What size replacement fusible link should be utilized ?The automotive service business recommends using the same gauge and length as the blown fusible link after the trigger of failure is corrected. How do you use a parallel connector?Insert the stripped finish of a fusible link and the stripped finish of the cable becoming protected into a parallel connector as shown, and crimp. A parallel connector ought to usually be protected with electrical tape or heat-shrink tubing.What size fusible link should be utilized in a new installation?The suitability of a fusible link in a new application can be determined only by a qualified harness engineer with complete knowledge of the circuit protection specifications, the installation and operating circumstances, and the security and liability elements. We cannot make particular recommendations.Visit our internet site for even more articles similar to this about chute fusible link.